|
|
|
Finally... You Can Talk to Radar Contact! |
|
| There's little doubt that Radar Contact is the most technically reliable and realistic flight simulator ATC programme on the market today. However, pressing keys on a keyboard is not a terribly realistic way to perfect ATC communications. What's been missing to complete this package? A Voice Operated paradigm. |
|
Introducing SuperATC |
|
Simply Download and Install SuperATC and you'll be speaking to your Co-Pilot
who will handle your ATC communication requirements with Radar Contact. It's truly amazing to see how it works!
And, best of all... it's FREE!!! |
| List of SuperATC Radar Contact 4 Voice Commands: |
|
Emits Keys CTRL+SHIFT+0 Main menu Emits Keys CTRL+SHIFT+1 Acknowledge and contact Affirm Clearance delivery, ready to copy Choose landing mode Contact approach Contact clearance delivery Contact control Contact delivery Contact departure Contact (the) destination tower Contact ground Contact next control Contact tower Delivery ready to copy Direct to waypoint Next control Monitor tower Ready for departure Request taxi Request vectored approach Tune to the tower Emits Keys CTRL+SHIFT+2 Abort take off Declare rejected takeoff Declare aborted takeoff Flight critique Get ATIS Get local ATIS information Get weather briefing Going missed Missed approach Reject take off Request departure runway Request push and start Request runway Request runway for departure Request to leave frequency for weather Request visual approach Request weather Emits Keys CTRL+SHIFT+3 Contact ground for clearance End radar contact Get clearance Ground ready to copy Notam on course Request P D descent Request return to airport Emits Keys CTRL+SHIFT+4 Clearance by F F S Declare emergency Request higher Request I A P approach Wind check Emits Keys CTRL+SHIFT+5 Clearance en route Clearance in air Field in sight Request landing runway Request lower Request runway for landing Emits Keys CTRL+SHIFT+6 Unable to comply Emits Keys CTRL+SHIFT+7 Acknowledge Acknowledge hand off Acknowledge I F R clearance Cleared for take off Cleared to land Cleared to {WAYPOINT} as filed Copy {FLIGHTNUMBER} (e.g. "Copy 1123") Copy {AIRLINEATC} {FLIGHTNUMBER} (e.g. "Copy Speedbird 1123") Expect vectors runway {RUNWAY} Line up and wait Position and hold Read back clearance Ready to copy Taxi into position and hold Taxi to the ramp Taxi to and hold short of Traffic in sight NOTE: To get {AIRLINEATC} and {FLIGHTNUMBER} ask, "What is our callsign?" NOTE: The {AIRLINEATC} and {FLIGHTNUMBER} information is derived from the simulator's aircraft data... NOT from Radar Contact. In Project Magenta installations, the information is pulled from the External Cockpit panel settings. Emits Keys CTRL+SHIFT+8 Previous menu Emits Keys CTRL+SHIFT+9 Next menu Emits CTRL+SHIFT+O Over to next controller Emits CTRL+SHIFT+P Display flight plan Emits CTRL+SHIFT+R Please repeat instruction Repeat instruction Repeat last instruction Emits CTRL+SHIFT+; Save radar contact Emits CTRL+SHIFT+L Set nav frequencies Emits CTRL+SHIFT+K Hand back communications Take over communications Emits CTRL+SHIFT+M Hand back plane Take over plane |
| What's Next? |
|
| ATTENTION It's Your Plane Users! |
| There's no need for you to download and install SuperATC... it's already built into IYP! |
|
Regards, Robert Cezar |
SuperATC |
You are receiving this newsletter as part of your It's Your Plane membership. |
Support Forums |
Unsubscribe | Change my e-mail address |
 |
It's Your Plane - ©2008 Pacific Feelings Media All rights reserved. It's Your Plane is a registered trademark of Pacific Feelings Media and Robert M. Cezar. |
|